13
Figure 9 Position AP
5. Slide the slider across to lock the AP to the bracket (see Figure 10
Figure 10 Lock AP to bracket
Connecting power
This section describes how to power the AP in the following ways:
By Power over Ethernet (PoE) supplied over the LAN by an 802.3af PoE compliant
device such as a switch.
By PoE supplied by a PoE injector or midspan (not included with the AP).
NOTE:
The PoE injector must be purchased separately.
Suspend ceiling T-rail
Ceiling bracket
Slider
To Next Page
Loading...
