347
Figure 383 SET CODE
Verifying the configuration
On the AP shown in Figure 380, select Summary > Client from the navigation tree to enter the page
shown in Figure 384, w
here you can verify that the workgroup bridge is online.
Figure 384 Verify that the workgroup bridge is online
• You can see that the client with MAC address 0014-6c8a-43ff and the workgroup bridge with MAC
address 000f-e2333-5510 have been successfully associated with the AP.
• The wired devices on the right (such as printers and PCs) can access the wireless network through
the workgroup bridge.
Configuration guidelines
As shown in Figure 385, the workgroup bridge has two radio interfaces. Radio 1 connects the
workgroup bridge to the AP, and Radio 2 connects the workgroup bridge to the client. To enable the
client associated with Radio 2 to access the AP through the workgroup bridge, you need to disable
wireless user isolation on the Security > User Isolation page.
Figure 385 Network diagram
To Next Page
Loading...
