12-1
z Support of the H3C WA series WLAN access points (APs) for commands may vary by AP model.
For more information, see Feature Matrix.
z The interface types and the number of interfaces vary by AP model.
z The models listed in this document are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
12 IPv6 Basics Configuration Commands
Support for the IPv6 basics configuration commands depends on the AP model.
IPv6 Basics Configuration Commands
display ipv6 fib
Syntax
display ipv6 fib [ ipv6-address ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-address: Displays the IPv6 FIB entries for an IPv6 address.
Description
Use the display ipv6 fib command to display IPv6 FIB entries. If no argument is specified, all IPv6 FIB
entries will be displayed.
The AP looks up a matching IPv6 FIB entry for forwarding an IPv6 packet.
Examples
# Display all IPv6 FIB entries.
<Sysname> display ipv6 fib
FIB Table:
To Next Page
Loading...
