H3C WA530 - Leds

16
LEDs
Table 5 LED description (fit AP mode)
LED Status Description
Off No power is present or the LED was turned off.
Yellow
Steady on
The AP is initializing, or an initialization exception
has occurred.
Flashing at 1 Hz No radios have been detected.
Flashing at 2 Hz
The Ethernet interfaces are down and no mesh links
are established.
Green
Steady on
The AP has registered on an AC, but does not have
any associated clients.
Flashing at 0.5 Hz
The AP has started up but has not registered on any
AC.
Flashing at 1 Hz Only the 2.4G radio has associated clients.
Flashing at 2 Hz The AP is upgrading the image.
Blue Flashing at 1 GHz Only the 5G radio has associated clients.
Alternating between green and blue at
1 Hz
Both the 2.4G and 5G radios have associated
clients.
Table 6 LED description (cloud AP mode)
LED Status Description
Off No power is present or the LED was turned off.
Yellow
Steady on
The AP is initializing, or an initialization exception
has occurred.
Flashing at 1 Hz No radios have been detected.
Flashing at 2 Hz
The Ethernet interfaces are down and no mesh links
are established.
Green
Steady on
The AP has started up but does not have any
associated clients.
Flashing at 1 Hz Only the 2.4G radio has associated clients.
Flashing at 2 Hz The AP is upgrading the image.
Blue Flashing at 1 GHz Only the 5G radio has associated clients.
Alternating between green and blue at
1 Hz
Both the 2.4G and 5G radios have associated
clients.