12
SECTION 1, continued
1.4 Display Screen in Function and Numeric Modes
The main display operates in two modes: function mode and
numeric mode. The user does not select the mode, changeover is
automatic depending on the options selected, where the user is in
an analysis, and what information the instrument needs from
the user.
The main display shows action icons (
ZERO and READ)
displayed below the horizontal line. This shows there are two
available options to select (zero the instrument, or take a reading)
at this point in the analysis.
The numeric mode is signified by the “
#” icon illuminated below
the horizontal line. In the numeric mode, some function keys act
as numeric entry keys (corresponding to the number on the key).
1.5 Icon and Display Screen
Figure 3 shows the icons displayed by the DR/800 Series
Colorimeters. Table 2 provides a brief description of each
display element.
Figure 3 Icon and Main Display Screen
To Next Page
Loading...
