Set automatic print functions
Note: If the sample period is very brief and the hold time is zero, some sample data may be skipped.
1. On the Counter Navigation screen, push PRINTER.
2. On the Print Center screen, select the Sample Print Mode field. Select an option for automatic
printing.
Option Description
None No data will print automatically
Alarms Prints results when a count alarm is exceeded
Cycles Prints the results of the first count cycle and multiples of the programmed count cycle
All Prints results after each count cycle is finished
3. Push ENTER to confirm.
Review historical buffer data
Records stored in the buffer are known as Historical data. These records can be accessed
individually or sorted by location, date or time. The buffer can also be configured to collect partial
data for aborted samples.
Set the data filter
The data filter can be set up to sort by location, date and time, either as individual parameters or in
combination. To set the data filter, go to the Data Filter Setup screen.
1. Push to go to the Data Filter Setup screen.
2. Select a filter option.
Option Description
Filter by location Check all of the locations to be included in the results. Push ALL to select all locations, or
push NONE to deselect all locations.
Filter by date Enter dates in the DATE FROM and DATE TO fields. Dates are in YYYY-MM-DD format.
Filter by time Enter the needed times in the TIME FROM and TIME TO fields. Time is in HH:MM:SS
format.
Clear the data buffer
Data that has been exported or is not needed can be deleted from the buffer.
1. On the Counter Navigation screen, push SYSTEM.
2. Select the Options and Accessories tab.
3. To erase all the data in the buffer, push CLEAR BUFFER.
Export data
Export data to maintain an electronic record for analysis and reporting.
1. On the Counter Navigation screen, push EXPORT.
2. Select USB Flash Drive or Network server.
Note: To export data to a network server, configure and enable the FTP function. Refer to Configure and
enable the FTP function on page 39.
English
37
To Next Page
Loading...
