Manage users and permissions
Passwords allow the system administrator to restrict access to the instrument settings. When
passwords are enabled, there are two levels of access:
• Administrator—Access to all settings on the instrument except for service (factory) access
• Operator—Access to review historical data and read current measurement values in the
Diagnostics section. Operator access can also print historical or diagnostics data.
If password protection is not enabled, all users can access all functional settings of the instrument.
Note: Factory settings are never accessible without a password.
Enable the user logon function
To enable user and password login:
1. Push SYSTEM.
2. Select the Basic Tab.
3. Select User Logon Required.
Log on as administrator
1. On the Counter Navigation or Sample screen, push to log off.
2. Select the User Name field. Enter "Admin". Push ENTER.
3. Select the Password field. Enter the default password "123456". Push ENTER.
4. Push OK.
Note: To maintain system security, change the default administrator password. Refer to Change the password
on page 30.
Change the password
The password can be changed at the logon screen.
1. From the Counter Navigation screen, push Factory.
2. Push CHANGE PASSWORD.
3. Enter the username and push ENTER.
4. Enter the old password and push ENTER.
5. Select the New Password field. Enter a new password and push ENTER.
6. Select the Confirm Password field. Enter the new password again. Push ENTER.
7. Push OK.
Note: To replace a forgotten password, contact the manufacturer with:
• The counter serial number
• The current date setting in the format MMDDYYYY.
Replace a forgotten password
If the System Administrator password is forgotten, contact technical support to get a new password.
Technical support requires the information that follows to supply a new password:
• Instrument serial number
• Current date setting in the format MMDDYYYY, where MM is the two digit month, DD is the two
digit day, and YYYY is the four digit year
30
English
To Next Page
Loading...
