BEFORE FIRST USE
Check that all accessories are complete and the unit is not
damaged. Fill water into water tank to the MAX level and brew
water for several times without coffee, then discard the water.
Clean and dry all detachable parts thoroughly according to the
section “CLEANING AND MAINTENANCE”.
USING THE COFFEE MAKER
SETTING THE CLOCK
1. When the coffee machine is first connected to the power supply,
the screen will display flashing 0000.
2. Press the ‘ON/OFF’ once to enter standby mode. (if pressed twice
the coffee machine will enter brewing mode, press ‘ON/OFF’
again to cancel this.)
3. Press the ‘H’ (Hours) button to set the 24hr clock (0-23)
4. Press the ‘MIN’ button to set the minutes (0-59).
www.haden.com www.haden.com
7
To Next Page
Loading...
