DELAY BREWING
Once you have set the clock you can now use the delay brewing
function with this coffee machine.
1. Press the ‘SET’ button once and the timer will revert to 0:00 with
a flashing clock underneath. The coffee maker is now ready for
programming.
2. Enter the desired brewing time using the ‘H’ and ‘MIN’ buttons.
3. Press the ‘SET’ button to confirm your selection.
4. Now on the main display a clock symbol will be displayed
indicating that a delay program has been set.
Note: The Delay function will not work if the clock is not set.
CLEANING & MAINTENANCE
CAUTION: Be sure to unplug this coffee machine before cleaning.
To protect against electrical shock, do not immerse cord, plug or
unit in water or liquid. After each use, always make sure plug is first
removed from wall outlet.
1. Clean all detachable parts after each use in hot soapy water.
2. Wipe the exterior surface of unit with a soft, damp cloth to
remove stains.
3. Water droplets may build up in the above area of the funnel
and drip onto the product base during brewing. To control the
dripping, wipe off the area with a clean, dry cloth after each use.
4. Use a damp cloth to gently wipe the warming plate. Never use
abrasive cleaner to clean it.
5. Replace all parts and keep for next use.
NOTE: Ensure that the filter assembly is correctly fitted and locked
by lifting the handle hooking it into the coffee machine housing.
www.haden.com www.haden.com
9
To Next Page
Loading...
