NOTE:
In order to see the type and model of the machine, please see the
specication plate. Usually found on the back of the machine. See
example (Fig.1)
Fig.1
MILL DRILL
MACHINE
HM-32
MODEL NO.
SERIAL NO.
DATE OF MANF.
Note:
is manual is only for your reference. Owing to the continuous improvement of
the machine, changes may be made at any time without obligation or notice. Please
ensure the local voltage is the same as listed on the specication plate before
operating this electric machine.
Distributed by
www.machineryhouse.co.nz
MACHINE DETAILS
To Next Page
Loading...
