Auto Mode
-Delete User PIN Code
User PIN codes can be programmed through the Master PIN Code.
1.When deleting User PIN Codes, the User Number must be entered within 10 seconds or time expires.
2.No matter setting succeed or failed, the process won’t completed and stay at current stage, you can press “*” to return
to previously menu.
3.Deleting all User PIN codes could be done only by resetting the lock to factory default settings.
-Delete User Fingerprint
User fingerprint can be programmed through the Master PIN Code.
1.When deleting User fingerprint, the fingerprint must be entered within 10 seconds or time expires.
2.No matter setting succeed or failed, the process won’t completed and stay at current stage, you can press “*” to return
to previously menu.
3.Deleting all User fingerprint could be done only by resetting the lock to factory default settings.
-Delete User Card
User card can be programmed through the Master PIN Code.
1. When deleting User card, the card must be entered within 10 seconds or time expires.
2. No matter setting succeed or failed, the process won’t completed and stay at current stage, you can press “*” to return
to previously menu.
3. Deleting all User card could be done only by resetting the lock to factory default settings.
-Locking Mode
The default locking mode is auto mode.
（Only available on ER5100）
To Next Page
Loading...
Need help?
General
