Hafler 1600 - Specifications; General Specifications (TA1100;TA1600); TA 1100 Performance Specifications; TA 1600 Performance Specifications

TA1100/TA1600
Signal-to-Noise: >102dB below rated output “A” weighted
CMRR: >65dB at 1kHz
Input Impedance: 47kΩ per phase balanced
47kΩ unbalanced
Gain: 29dB maximum
Damping Factor: 350 (to 1kHz); 150 (to 10kHz); 18 (to 100kHz)
Controls & Switches: Front Panel: Power Switch and Level Controls
Indicators: Power Lamp, Clip/Thermal/Protect LEDs
Connectors: Input: Balanced:
1
/
4
” Tip Ring Sleeve
Unbalanced RCA
Output:
1
/
4
” Phone, Spring Clip
Headphone:
1
/
4
”
Power: IEC 320
Dimensions: 19”W x 8 1/2”D x 3 1/2”H (2 rack space)
(48cm x 25cm x 8.9cm)
Net Weight: 22 lbs
(9.98kg)
TA 1100
Power Rating: 1kHz, 0.1% THD
50 wpc into 4Ω
40 wpc into 8Ω
Frequency Response: ± 0.1dB, 20Hz to 20kHz
+0/-3dB, 1.0Hz to 100kHz
Slew Rate: 20V/µs
Input Sensitivity for rated output power:
Unbalanced: 0.640V RMS (8Ω), 0.510V (4Ω)
Balanced: 0.320V (8Ω), 0.250V (4Ω) per phase
Power Consumption: 40VA quiescent
TA 1600
Power Rating: 1kHz, 0.1% THD
75 wpc into 4Ω
60 wpc into 8Ω
Frequency Response: ± 0.1dB, 20Hz to 20kHz
+0/-3dB, 1.0Hz to 300kHz
Slew Rate: 100V/µs
Input Sensitivity for rated output power:
Unbalanced: 0.780V RMS (8Ω), 0.620V (4Ω)
Balanced: 0.390V (8Ω), 0.310V (4Ω) per phase
Power Consumption: 60VA quiescent
– i –
Specifications