Need help?Do you have a question about the Hafler 9303 and is the answer not in the manual?
General| Type | Stereo Power Amplifier |
|---|---|
| Input Impedance | 47 kOhms |
| Total Harmonic Distortion | Less than 0.05% at rated power |
| Signal-to-Noise Ratio | >100dB |
| Input Sensitivity | 1.5V for full output |
| Speaker Load Impedance | 4 to 8 ohms |
| Damping Factor | Greater than 200 at 8 ohms |
Follow all instructions, heed warnings, and retain the manual for safety and operation.
Connect to correct power sources and ensure proper grounding to prevent shock hazards.
General performance metrics including bandwidth, signal-to-noise ratio, slew rate, CMRR, and gain.
Detailed performance specifications for the Hafler 9303 model, including power, distortion, and dimensions.
Detailed performance metrics for the Hafler 9505 model, including power, distortion, and dimensions.
Connect to a 120V, 60Hz grounded AC receptacle using the provided IEC Type 320 cord.
Instructions for setting the STEREO/MONO switch for high-power single-channel bridged mono operation.
Seven-year limited warranty for original owners within the Continental US, Alaska, and Hawaii.
To Next Page
