Need help?Do you have a question about the Hafler 9180 Series and is the answer not in the manual?
Read all safety and operating instructions before applying power.
Follow all warnings on equipment and in instructions.
Ensure proper airflow around the unit.
Use grounded cords to reduce shock risk.
Details on power rating, bandwidth, impedance, controls, and size.
Information on rack mounting the amplifier using EIA spacings.
Guidance on proper placement for heat dissipation and airflow.
Configuration for different AC line voltages (100-240V).
Connecting the power cord and using the power switch.
Connecting audio sources via RCA jacks.
Adjusting input signal attenuation via front panel controls.
Switching between stereo and mono (bridged) operation.
Discusses suitability for various loudspeaker types and impedances.
Procedure to adjust the amplifier's AC line voltage configuration.
Procedure for setting the bias operating point of the output stage.
Illustrates the amplifier's internal signal flow and component relationships.
To Next Page
General
