hager LCP01X - Testing Access Controls

Activate the outdoor
caller unit
Status display
on the handset (1)
Latch access status
1. Hold the tag in front of the
name label.
Closed
1. Or enter the access code (2)
Mr et Mme Evêque-Mourroux
C
Mr et Mme Evêque-Mourroux
2. If a latch is connected,
it will be unlocked
within 5 seconds.
2. If a gate alone is connected
(without a latch), side gate
access is unlocked within
5 seconds.
Open
or
or
C
C
(1) If a position contact is connected.
(2) If you press the wrong button, press then enter the access code again.
For additional tests (gate access, listen-in and inter-handset communication functions,
etc.), please refer to the corresponding chapters in the user manual.
The doorphone is now operational. If need be, you can customise it by following the
instructions in the chapters on Modifying outdoor caller unit operating options and
Modifying handset operating options in the user manual.
IMPORTANT: to test the access controls, it is first necessary to register a tag or programme an access code
on the outdoor caller unit (see User manual/Modifying outdoor caller unit operating options).
209
GB
8.2 Testing access controls