hager XEV1K07T2 User Manual

aa
11
Appendix
Technical data
witty charging station
04.03 Technical data
Note
Subject to changes
The current PDF document at hager.com is always binding!
Permitted environmental conditions
Operating temperature -25°C – +50°C
Relative humidity 5 % ... 95 %
Protection IP 55, IK 10
Electrical properties
Voltage 230 V~ (single-phase version) -15 %/ +10 %
400 V (three-phase version) -15 % / +10 %
Frequency 50/60 Hz +/- 1%
Current consumption in standby mode 1.7 W
Max. charging current/charging capacity of Mode 3 T2/T2S
connection (version-dependent)
[1]
32 A - 7 kW (1-phase)/ 32A - 22 kW (3-phase)
Max. charging current/charging capacity of Mode 2 TE/TF
connection (version-dependent)
[2]
10 A – 2300 W
Mechanical properties
Maximum carrying capacity of cable holder (accessories) 7 kg
Dimensions: Height x width x depth 549 x 250.5 x 173 mm
WiFi
[3]
Frequency range 2.4 ... 2.4835 GHz
Transmitting power 100 mW
RFID
Frequency range 13.553 ... 13.567 MHz
Transmitting power 42 dBµA/m (at 13.56 MHz)
Vehicle compatibility identifier
04.04 Accessories
Accessory product Order number
Cable holder for charging station XEVA100
RFID cards for standard users (set of 20) XEVA400
RFID cards for administrators (set of 3) XEVA410
RFID cards for witty flow charging stations with WiFi hotspot (set of 20)
[3]
XEVA420
1-phase charging cable for Mode 3 T2/T2 20 A, 5 m/ 7.5 m
[7]
XEVA711/ XEVA712
1-phase charging cable for Mode 3 T2/T2 32 A, 5 m/ 7.5 m
[7]
XEVA713/ XEVA714

hager XEV1K07T2 Specifications

General

Brand	hager
Model	XEV1K07T2
Category	Battery Charger
Language	English