hager XEV1K11T2 User Manual

6LE007851A
XEV1K07T2
XEV1K11T2 / XEV1K22T2
a
notice d’installation - p. 2
Borne de charge witty pour véhicule
électrique
z
installation manual - p. 30
Witty charging station for electric
vehicle
e
Installationsanleitung - S. 58
Ladestation Witty für Elektrofahrzeuge
y
istruzioni di installazione - p. 86
Stazione di ricarica witty per veicoli
elettrici
• Avant toute opération sur la borne, coller une des étiquettes produit fournie
dans l’emballage sur la première page de la notice Utilisateur.
• Before carrying out any operations on the charging station, stick one of the
product labels included in the packaging onto the first page of the user manual.
• Kleben Sie vor jeder Arbeit an der Ladestation eines der in der Verpackung
enthaltenen Produktetiketten auf die erste Seite der Betriebsanleitung.
• Prima di qualsiasi operazione sulla stazione, incollare una delle etichette
prodotto fornite nella confezione sulla prima pagina del manuale d’uso.

hager XEV1K11T2 Specifications

General

Product name	hager XEV1K11T2
Input Voltage	230 V
Rated Current	16 A
Number of Phases	1
Frequency	50 Hz
Output Power	3.7 kW
Charging Mode	Mode 3
Connector Type	Type 2
Degree of Protection	IP54
Impact Strength	IK08
Output Current	16 A
Power	3.7 kW
Operating Temperature	-25 to +50 °C
Charging Time	Depends on vehicle battery capacity
Protection	Overcurrent, Overvoltage, Short Circuit
Output Voltage	230 V AC

Summary

Please read before carrying out any electrical wiring on the charging station

Wiring the shunt coil (Shunt Trip function)

Details on wiring the shunt coil for the Shunt Trip function, noting modifications from previous models.

Electrical protections for charging stations

Quality of the earthing according to the EV READY label 1.4

Explains earthing requirements based on the EV READY label 1.4 for different neutral systems.

Detection of contacts stuck to the contactor according to the EV READY 1.4 label.

Describes the detection mechanism for stuck contactors in charging stations over 3.6 kW, as per EV READY 1.4.

Installation

6.1. Opening

Instructions on how to safely open the charging station before proceeding with installation or maintenance.

6.2. Mounting

Detailed steps and prerequisites for mounting the charging station, including cable requirements and dimensions.

Power cabling

Wiring the shunt coil MZ203 (Shunt Trip function)

Charging station configuration

11.1. Charging station configuration procedure

Details the standard procedure for configuring the charging station at the factory and for modifications.

11.2. Modify the settings using a USB flash drive

Step-by-step guide on how to modify charging station settings using a USB flash drive.

Testing the contactor

Charging station operation

14.1. Selecting the charging mode

Explains the three available charging modes and how to select them using the hover button.

Charging station diagnostic

15.2. Diagnostic parameters and their explanations

Electrical maintenance