Need help?Do you have a question about the hager Witty and is the answer not in the manual?
General| Rated voltage | 230 V |
|---|---|
| Input voltage type | AC |
| Nominal frequency | 50/60 Hz |
| Number of modules | 4 |
| Output Voltage | 12 V DC |
| Charging Time | Depends on battery capacity |
| Protection | Short circuit, reverse polarity |
Device must be installed by a professional electrician according to local standards and TBTS rules.
Identifies and labels key components of the charging station with their functions.
Details the internal electrical components of the charging station with numbered labels.
Explains electrical protection measures, including circuit breakers and fuses.
Details requirements for the quality of the earthing system.
Describes the specifications for connection terminals and cable sizes.
Explains the function that detects welded contactor contacts for safety.
Provides drilling patterns for mounting the station on a wall.
Instructions for mounting the basic wall fixation support.
Diagrams for ground installation of models XEV418/19 and XEV420.
Details the electrical supply requirements and connection points.
Sets the maximum charging current for the station.
Configures whether charging starts immediately or is postponed.
Explains how to set up postponed charging using a night tariff signal.
Configures dynamic charging based on TIC protocol.
How to authenticate locally using a USB stick.
Details how to authenticate users remotely online.
Configures user authentication methods locally or remotely.
Initiates charging based on an external signal.
Manages charging to reduce demand during peak consumption.
Establishes connection from a remote server to the charging station.
Details connecting the station to a router for internet access.
Connects to a GPRS modem with a fixed IP address.
Connects using ADSL or GPRS modem with dynamic IP.
Configures the station to connect to a remote server.
Explains LED patterns, types of malfunctions, and their causes.
Specifies torque values for screw connections during maintenance.
Lists environmental operating conditions like temperature and humidity.
Details electrical specifications like voltage, frequency, and power.
To Next Page
