EasyManuals Logo

hager XEV1K11T2 User Manual

hager XEV1K11T2
Go to English
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
47
14.2. Forcing the charge
14.3. Unlocking the charging cable
To save a new charging mode:
5
20 secs.
The lighting strip flashes
quickly for 5 seconds depending on
the charging mode selected.
Wait
20 secs.
OR
Connect the electric vehicle
to the charging station
If the charging cable is locked on the charging station, you can release it by following the procedure below. The charging
station must be unlocked (key to ON position):
Push the plug to the bottom of the
socket in the charging station.
1
The lighting strip flashes green/white. You can remove the charging cable. This procedure can be done several
times in a row.
3
Place your thumb on the hover button for approximately 5 seconds
then remove it. You will hear a “click” as it unlocks.
approx. 5
secs.
2
Connect the electric vehicle to the
charging station.
1
Place your thumb on the hover button for 2 seconds then remove it.
The lighting strip starts to pulse green.
2 secs.
2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the hager XEV1K11T2 and is the answer not in the manual?

hager XEV1K11T2 Specifications

General IconGeneral
Brandhager
ModelXEV1K11T2
CategoryBattery Charger
LanguageEnglish

Related product manuals