30
1. Please read before carrying out any electrical wiring on the charging station .................................................................................................. 31
1.1. Wiring the shunt coil (Shunt Trip function) ............................................................................................................................................................. 31
2. Overview of the standard range ................................................................................................................................................................................. 31
3. Description of the exterior .......................................................................................................................................................................................... 32
4. Description of the interior ........................................................................................................................................................................................... 33
5. Electrical protections for charging stations ............................................................................................................................................................. 34
6. Installation ..................................................................................................................................................................................................................... 35
6.1. Opening ................................................................................................................................................................................................................... 35
6.2. Mounting .................................................................................................................................................................................................................. 35
7. Power cabling ............................................................................................................................................................................................................... 37
8. Wiring the shunt coil MZ203 (Shunt Trip function) .................................................................................................................................................. 37
9. Wiring deferred charging ............................................................................................................................................................................................ 38
10. Finalisation .................................................................................................................................................................................................................. 39
11. Charging station configuration................................................................................................................................................................................. 40
11.1. Charging station configuration procedure ........................................................................................................................................................... 40
11.2. Modify the settings using a USB flash drive ........................................................................................................................................................ 40
12. Testing the contactor ................................................................................................................................................................................................. 44
13. Closing the charging station..................................................................................................................................................................................... 45
14. Charging station operation ....................................................................................................................................................................................... 46
14.1. Selecting the charging mode ................................................................................................................................................................................ 46
14.2. Forcing the charge ................................................................................................................................................................................................ 47
14.3. Unlocking the charging cable ............................................................................................................................................................................... 47
15. Charging station diagnostic ...................................................................................................................................................................................... 48
15.1. Introduction ........................................................................................................................................................................................................... 48
15.2. Diagnostic parameters and their explanations .................................................................................................................................................... 48
15.3. Log file ................................................................................................................................................................................................................... 51
16. Indicators ..................................................................................................................................................................................................................... 52
16.1. Normal operation................................................................................................................................................................................................... 52
16.2. Anomalies .............................................................................................................................................................................................................. 52
17. Wiring the charging stations ..................................................................................................................................................................................... 53
18. Electrical maintenance .............................................................................................................................................................................................. 54
19. Technical characteristics........................................................................................................................................................................................... 55
20. Lexicon ......................................................................................................................................................................................................................... 56
Contents
Safety advice
• Electrical appliances should only be installed and mounted by a qualified electrician. Accident prevention measures in force in the country must
be respected. Failure to adhere to the installation instructions could lead to damage to the appliance, a fire or could be a danger to others.
• Please observe the measures and standards in force for SELV electrical circuits when installing and fitting the cables. Before any intervention on
the appliance or the charge, switch off the charging station at the circuit breaker upstream and lockout the appliance if necessary. After opening
the charging station, check that there is no voltage running to any of the parts.
• When installing the charging station, check that there are no environmental conditions (rain, mist, snow, dust, wind, etc.) that could pose a danger
or cause a breakage during handling and when powering on again.
• Remember to take into account all of the circuit breakers delivering potentially dangerous voltages to the appliance or charge.
• Risk of electrical shock.
• Please separate the wiring between the high current/low voltage (D/N input, output to shunt coil) of the controller board and the low current/extra
low voltage (TIC input, CHP inputs/outputs) of the TIC board.
All of the FAQs, resources and contacts you need to install a Witty charging stations are available by scanning the Flashcode or by going
to: https://help.hager.fr/installation-produits/
To Next Page
Loading...
Need help?
General
