EasyManuals Logo

hager XEV1K07T2 User Manual

hager XEV1K07T2
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
ss
10
Appendix
Maintenance and care instructions
witty charging station
LED display Signal Causes Solutions
The electric vehicle is being charged in emergency
operation.
[3]
Find the cause of the fault and remedy it.
Contact the vehicle dealer if necessary.
2 x
[6]
There is a local communication problem with the
Ethernet/WiFi
There is no connection to the energy management
controller (EMC) flow
[3]
Check the network connections.
Ensure that a DHCP router is available in
the network.
Reconnect the charging station to the
EMC flow (see the XEM470 guide or flow.
hager.com).
[3]
Table 2: LED displays for faults
[2]
Mode 2 TE/TF socket outlet, version-dependent and not available in all markets. The additional socket outlet must only be used to charge batteries for bicycles
or scooters, for example.
[3]
Not applicable to all charging stations (version-dependent)!
[6]
LED signalling varies, version-dependent!
04.02 Maintenance and care instructions
Qualified electrician
Electrical devices may only be installed, assembled, repaired and dismantled by a trained
and certified qualified electrician in accordance with the relevant installation standards,
guidelines, regulations, directives, safety and accident prevention regulations of the coun-
try.
The charging station is maintenance-free.
However, we recommend the following approximately once a year:
Check the housing of the charging station for defects and external damage.
If you find any damage, stop using the device for charging and contact a qualified electrician.
Clean the housing with a dry or slightly damp cloth.
With the charging cable disconnected, clean the charging cable and dirty contacts with a dry
cloth.
Maintenance instructions
Never use harsh cleaning agents, water or steam jet cleaners, and never submerge the
charging cable in liquids.
Check that the residual current circuit breaker is functioning correctly (see device instructions).
Check the electrical switching and safety equipment in the house distribution board for visual de-
fects.

Other manuals for hager XEV1K07T2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the hager XEV1K07T2 and is the answer not in the manual?

hager XEV1K07T2 Specifications

General IconGeneral
Brandhager
ModelXEV1K07T2
CategoryBattery Charger
LanguageEnglish

Related product manuals