To Next PageTo Next PageWhy does my Haier Air Conditioner show a suction temperature sensor failure?
A suction temperature sensor failure in your Haier Air Conditioner might be due to incorrect wiring or poor connection of the compressor.
General| Cooling Capacity (BTU) | 24000 |
|---|---|
| Refrigerant | R410A |
| Power Supply | 220-240V/50Hz/1Ph |
| Energy Efficiency Ratio (EER) | 3.21 |
| Type | Wall Mounted |
| Operating Temperature (Cooling) | 18-43 °C |
| Cooling Capacity | 7030 W |
Provides essential safety warnings and precautions for repair and servicing.
Overview of the unit's operational logic and control parameters.
Details compressor frequency control modes and limitations based on operating conditions.
Outlines various protection mechanisms against overcurrent, overheat, and freezing.
Safety warnings and error detection scenarios before starting diagnostics.
Lists common operational problems and corresponding troubleshooting steps.
Details error codes indicated by indoor display and LED flashes for diagnosis.
Shows cooling capacity variations based on indoor and outdoor temperatures.
Illustrates power consumption in cooling mode across different temperature conditions.
Shows heating capacity variations based on indoor and outdoor temperatures.
Illustrates power consumption in heating mode across different temperature conditions.
Guidance on removing the compressor and heat exchanger assembly.
