Haier 24E2000 User Manual

16
6-2 External Equipment Connections
Your TV can be used to display output from most devices.
1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc)
2. Turn the TV and your device off.
3. Connect the appropriate cable (not included) to the TV and the device.
4. Turn the TV and your device on. Set the TV’s input to match the connection you used (HDMI, Component, Composite,
etc).
Connecting to an antenna/cable wall jack
Connect one end of a coaxial cable (not included) to the ANT IN jack on the back of your TV, then connect the other end
of the cable into the antenna or cable TV wall outlet.
Note
 To improve picture quality from an antenna in a poor signal area, install a signal amplifier. If you need to split the antenna
signal to connect two TVs, install a two-way splitter.
 Connector: F type plug. Input impedance: 75 ohm unbalanced. (Philippines) Connector: IEC type plug. Input impedance: 75
ohm unbalanced. (Others)

Haier 24E2000 Specifications

General

Screen Size	23.6 inch
Aspect Ratio	16:9
Resolution	1360x 768
Angle of View	H:178° V: 178°
Color Display	16.7 M
OSD Language	English/Spanish/ France
Response Time (ms)	14ms
Video/Audio System	NTSC-M / ATSC
Audio Power	2.5W + 2.5W
Power Consumption	36W
Standby	<0.5W
Mains Power	12V 3A adapter

Weight and Dimensions

Dimensions with Stand (W x H x D)	28.78”x18.89”x6.69”
Dimensions w/o Stand (W x H x D)	28.78”x17.22”x2.66”
Weight with Stand	13.89 lbs
Weight without Stand	9.92 lbs
Wall Mount Pattern (H x V)	200 x 100 mm
Wall Mount Screw Type	M6 x 12 mm