Haier A3FE737CPJM - Page 13

EN
5- Use
Notice: Inuences on temperatures
The indoor temperatures are inuenced by the following factors:
▶ Ambient temperature
▶ Frequency of door opening
▶ Amount of stored foods
▶ Installation of the appliance
5.8 Super-Cool function
Switch on the Super-Cool function if larger quan-
tity of food should be stored (for example after the
purchase). The Super-Cool function accelerates the
cooling of fresh food and protects the goods already
stored from undesirable warming. The factory setting
temperature is 0 to +1°C.
1. Unlock the panel by touching key “G” if it is locked
(Fig. 5.5-1).
2. Touch key “E” (Super-Cool) (Fig. 5.8.-1).
3. Indicator “e” illuminates and the function is acti-
vated (Fig. 5.8.-2).
By repeating the above steps or selecting an other
function this function can be switched o again.
Super-Cool
Super-Cool
5.8-1
5.8-2
Notice: Automatically switch o
This function will be automatically disabled after 3 hours.
13
4. Touch any key except “A“ (Fridge) to conrm, or the
setting conrms automatically after 5 seconds.
Displayed temperature stops ashing.
5.7.2.2 Adjust the temperature for freezer
1. Unlock the panel by touching key “G” if it is locked
(Fig. 5.5-1).
2. Touch key “C” (Freezer) to select the freezer com-
partment. The actual temperature in the freezer
compartment is displayed (Fig. 5.7.2-3).
3. Touch sequentially key“C” (Freezer) until the desired
value of temperature is ashing (Fig. 5.7.2-4).
A signal will sound at each key press. The tempera-
ture increases in sequences of 1°C from -16°C to
-24°C. The optimum temperature in the freezer is
-18°C. Colder temperatures mean unnecessary en-
ergy consumption.
4. Touch any key except “C” (Freezer) to conrm, or
the setting conrms automatically after 5 seconds.
Displayed temperature stops ashing.
Freezer Freezer
5.7.2-3 5.7.2-4