101
4. Precautions on Installation
5. Outdoor Unit Installation Guideline
• Check the strength and level of the installation ground so that the unit will not cause any operating vibration or
noise after installed.
• In accordance with the foundation drawing in x the unit securely by means of the foundation bolts.(Prepare four
sets of M8 or M10 foundation bolts, nuts and washers each which are available on the market.)
• It is best to screw in the foundation bolts until their length are 20mm from the foundation surface.
• Where a wall or other obstacle is in the path of outdoor unit s intake or exhaust airow, follow the installation
guidelines below. For any of the below installation pattems, the wall height on the exhaust side should be 1200mm
or less.
To Next Page
Loading...
