Need help?Do you have a question about the Haier AU162FYCRA(HW) and is the answer not in the manual?
General| Cooling Capacity | 4.6 kW |
|---|---|
| Heating Capacity | 5.2 kW |
| Voltage | 220-240 V |
| Compressor Type | Rotary |
| Heating Power | 1.4 kW |
| Power Input (Cooling) | 1.3 kW |
| Power Input (Heating) | 1430 W |
| Operating Temperature Range (Heating) | -15°C to 24°C |
Presents cooling capacity data based on air and water temperatures.
Presents heating capacity data based on air and water temperatures.
Provides essential safety advice for the installation process.
Criteria for choosing a suitable and safe installation location.
Details electrical and communication wiring diagrams and connections.
Details power source requirements and power cable specifications.
Steps and checks before the initial startup of the heat pump.
Outlines set points and hysteresis for cooling and heating modes.
Describes water flow alarms and essential annual maintenance.
Details basic and special functions for operating the controller.
Lists error codes, their definitions, and notes on restorability.
Details standby codes, reasons, and associated notes.
Covers issues with temperature, pressure, and other sensors/switches.
Addresses water flow protection, antifreeze, and pressure issues.
To Next Page