After Service
Please check and handle the refrigerator in following methods if its running status is abnormal. If the
problem still can not be solved, please contact the service centre. Please provide the specific product’s
model and name, annex details and serial number. (Please see relevant information on refrigerator’s
nameplate).
Please verify following matters before maintenance.
Do the plug, socket and fuse are connected;
if the power switch is turned off?
Is the supply voltage too low?
Is the power supply
connected?
Is the ground level, or is
the refrigerator placed
steadily.
Does some parts of
refrigerator contact
with a wall or other
objects
Temperature inside refrigerator is not low enough
Check to see if the
doors haven’t been
tightly closed, or if it is
too often to open the
doors, or are the doors
opened to long.
Whether the temperature
level is set too high, if is,
please reset.(For details,
please refer to Product
Function).
Is the refrigerator
directly shining by sun
or near a heat source,
such as stoves and
heaters.
Inadequate ventilation, if
something there cover the
condenser in the back of
the refrigerator, or if the
refrigerator can not
achieve a ventilation from
both side.
Downloaded from www.vandenborre.be
To Next Page
Loading...
