INSTALLATION INSTRUCTIONS
Electrical connection
1 This appliance must be connected to a 220V, 50Hz, sinusoidal, 10A
electrical supply.
2 Uncoil the power cord, remove and discard the plastic pin cover and plug into a
power socket.
3 Connect the appliance to an earthed outlet protected by a fuse of suitable capacity.
■ Check the power cord for damage and make sure it is not squashed or twisted when
installing the dryer.
■ Always remove the power cord from the power socket by the plug, not by the cord.
IMPORTANT!
■ Do not touch or operate the dryer with wet hands or with bare feet.
■ A damaged power cord must be replaced by a Haier trained and supported
service technician. The appliance must not be operated until it is repaired, as there
is risk of electric shock.
■ Do not operate this dryer if it has been damaged during tr
ansport. Contact your
Haier trained and supported service technician.
Product specifications
HDV70E1
Capacity (kg)* 7
DIMENSIONS (mm)
Width 600
Depth 585
Height 830
ELECTRICAL
Volts 220
Hz 50
Amps (maximum) 10
Rated Power (W) 1750
Waterproof degree
IPX4
* Capacity refers to the maximum dry weight of items the dryer can dry at any one time.
Rated capacity is determined by a country’s performance standards, so similar dryers may
have different capacities for different markets.
11
To Next Page
Loading...
Need help?
General
