Operation
Haier LCD HDTV/DVD EN-16
select Video menu.
Press
B
/ ENTER button and then use
/
button to select Mode.
PressC
/
button to select the option Standard,
Vivid, Custom and Mild.
You can also press PICTURE button on the remote control
to select the option Standard, Vivid, Custom and Mild.
Video
Audio
Channel
Lock
Function
Video
Mode Custom
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Advanced Video
50
50
50
0
50
Select
BackAdjust
EXIT
ENTER
/
How to customize your own picture
status
Press A MENU button and then use
/
button to
select Video menu.
Press
B
/ ENTER button and then use
/
button to select the desired items.
Press
C
/ ENTER button and then use
/
button
to adjust the setting.
ModeY
Select the mode of picture (Standard/ Vivid/ Custom/
Mild).
BrightnessY
This will adjust the light output of the complete
picture, which will mainly affect the darker areas of
the picture.
ContrastY
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
ColorY
This will adjust the saturation level of the colors to suit
your personal preference.
TintY
Allows you to select the color mix (Tint) of the picture.
SharpnessY
This will adjust the sharpness of fine details in the
picture.
Note
Only when the item of mode is custom, the R
Brightness, Contrast, Color, Tint, Sharpness and
Color Temperature can be set by user. In other
mode the value of them are preset.
Color temperatureY
This will increase or decrease Warm (red) and Cool
(blue) colors to suit personal preferences.
Select Cool to give the white colors a blue tint,
Standard to give the white colors a neutral tint, Warm
to give the white colors a red tint.
Advanced VideoY
To adjust the picture in advanced: DNR, Black Level
Extender, White Peak Limiter, CTI, Flech Tone,
Adaptive Luma Control.
DNR:q Digital Noise Reduction, to adjust to reduce
the appearance of digitizing errror caused by the
compressin: Medium/Strong/Auto/o/Low.
MPEG NR:q To adjust the MEPG Noise Reduction:
Medium, Strong, O and Low.
Adaptive Luma Control: q To adjust changes in the
luminance of the picture On or O.
Flesh Tone: q To adjust the esh colors: High, O,
Low or Medium.
Blue Stretch: q To set Blue Stretch: On and O.
MJC:q Motion judder cancellation (MJC), capable of
solving lm judder and motion blur.
Eect:To set the MJC level: O, Low ,Middle, High.
Demo Partition:To set the eective area of MJC: Left, All,
Right.
Press
A MENU button and then use
/
button to
select Video menu.
Press
B
/ ENTER button and then use
/
button to select Advanced Video.
Press
C
/ ENTER button and then use
/
button to select MJC.
PressD
/ ENTER button and then use
/
button to select the desired items.
Video
Audio
Channel
Lock
Function
MJC
Effect Low
Demo Partition Left
Demo
Select
Back
EXIT
/
MJC Demo
On
Off
120HZ FULL MOTION
Overscan: This function is active and visible in menu
only when the signal is EIA timing (480i /480p /720p
/1080i /1080p) in RGB color space in HDMI/DVI input.
To Next Page
Loading...
Need help?
General
