Operation
EN-19 Haier LCD HDTV/DVD
Screen Mode
Lets you choose the way an analog picture with a 4:3
aspect ratio is displayed on your TV with a 16:9 ratio
picture format.
Note
If a xed image is displayed on the screen for a R
long time, the image may become permanently
burned on the screen and remain visible.
Press
A MENU button and then use
/
button to
select Function menu.
Press
B
/ ENTER button and then use
/
button
to select Screen Mode.
Press
C
/
button to select Normal, Wide, Zoom,
Cinema.
You can also press ARC button on the remote control
to select the desired picture format: Normal, Wide,
Zoom or Cinema.
DPMS
PC Power Management. When set On, the set will be
put in standby mode automatically if there is no signal
received for 2 minutes.
Note
DPMS is useful only in VGA source.R
Blue Screen
Press A MENU button and then use
/
button to
select Function menu.
Press
B
/ ENTER button and then use
/
button
to select Blue Screen.
Press
C
/
button to select On or Off.
DCR
Dynamic Contrast Ratio. Press VOL+/- button to select
On or O.
Time Setup
This function allows you to select your local time zone.
Broadcasted time information will correct the clock
display for your local time.
Time Zone: Y Press VOL+/- button to select the
appropriate time zone.
Time Setup
Time Zone
Date/Time
Sleep Timer Off
Select
Back
EXIT
Video
Audio
Channel
Lock
Function
/
Date/Time: Y Press VOL+/ ENTER button to enter the
submenu.
Date/Time
Auto On
Date 2009/01/01
Time 11:54 AM
Timer Off
On Time 11:54 AM
Off Time 12:00 AM
Select
Back
EXIT
Video
Audio
Channel
Lock
Function
/
Auto: Press
VOL+/- button to select On or O . When
Auto mode on , the time can not be adjusted. Select
O , you can operate to set the time manually.
Date: Press
VOL+/- button to select the position and
digits button to set the date.
Time:Press VOL+/- button to select the position and
digits button to set the time.
Timer: Press VOL+/- button to select On or O . To
select O, the time can not be adjusted.
On Time/O Time:Press VOL+/- button to select the
position and digits button to set the time. Press ENTER
button to switch on AM and PM.
Sleep Timer: Y Press VOL+/- button to select the
number of minutes: To select O, 5Min, 10Min,15Min,30
Min,45Min,60Min,90Min,120Min,180Min or 240Min.
You can also press q SLEEP button to select quickly