What to do if my Haier HLP141E Dryer won’t work?
If your Haier Dryer won't work, ensure that it is properly plugged into the power cord. Additionally, check the circuit breaker and replace any blown fuses. Make sure that the front door is fully closed, and press the POWER or START/PAUSE button to initiate operation.
Why garments won’t dry enough in Haier HLP141E Dryer?
If garments aren’t drying enough in your Haier Dryer, ensure your washer's spin cycle is working correctly to remove enough water. Avoid overloading the dryer; reduce the number of garments per load. Also, make sure you've selected the appropriate drying cycle for the type of clothes you're drying (normal, heavy duty, or delicate).
Why my Haier HLP141E Dryer won’t heat?
If your Haier Dryer won’t heat, first check the ‘Dry Temp’ setting. Reset it using the ‘Dry Temp’ button until the indicator light shows ‘High’ or ‘Low’, and the LED is on. If the temperature indicator LED shows “No Heat”, change the temperature settings to High or Low, as the No Heat setting operates without heat. Also, ensure that the outside venting ducting and the exhaust filter are not blocked. Clean the exhaust filter if necessary.
What to do if my Haier HLP141E won't work?
If your Haier Dryer isn't working, try these steps: First, ensure the power cord is properly plugged in. Next, check the circuit breaker and reset it if necessary, or replace the fuses. Also, make sure the front door is fully closed and press the Power/ON/OFF or Start/Pause button.
Why is my Haier HLP141E not heating?
If your Haier Dryer isn't heating, ensure the 'Temp' button is set to ‘High’ or ‘Low’ with the LED indicator on. Remember that Air Dry operates without heat. Also, check that the outside vent isn't blocked and clean the exhaust filter.
What to do if Haier Dryer drum won’t turn?
If the drum of your Haier Dryer won’t turn and all four indicator lights of the Cycle button are on, ensure that the front door is completely closed. Then, press the START/PAUSE button to start the dryer.
How to fix Haier Dryer garments not drying enough?
If garments aren't drying enough in your Haier Dryer, ensure the washer's spin cycle is working correctly. Try reducing the amount of laundry in the dryer. Lastly, select the appropriate drying cycle for the load type – normal, heavy, or delicate.
General| Door hinge | Left |
|---|---|
| Control type | Buttons |
| Loading type | Front-load |
| Drying system | Vented |
| Product color | White |
| Built-in display | No |
| Appliance placement | Freestanding |
| Heat source | Electric |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Energy consumption | - kWh |
| Energy efficiency class | - |
| Cycle time | 150 min |
| Noise level | - dB |
| Drum capacity | - kg |
| Number of drying programs | 4 |
Weight and Dimensions| Depth | 631 mm |
|---|---|
| Width | 425 mm |
| Height | 685 mm |
| Weight | 25990 g |
Key safety guidelines to reduce risk of fire, electric shock, or injury when using the appliance.
Warning about child entrapment and risks associated with flammable materials like dry cleaning solvents.
Guidelines for proper grounding and warnings against using extension cords or adapter plugs to prevent hazards.
Covers correct venting procedures, material requirements, length, and critical warnings about fire risks.
To Next Page
