Why is not enough water coming in my Haier HLP21E?
If not enough water is coming into your Haier Washer, the water faucet may not be fully turned on. Also, check the water hose for tangles or bends and straighten it. Ensure the water level selection is properly adjusted.
What to do if my Haier Washer clothes have soap residue?
If your clothes have soap residue after washing in your Haier Washer, the detergent may not be dissolving properly. Check the water temperature or add detergent as the washtub is filling with water (before loading clothes). Using liquid detergent is also recommended.
Why are my clothes ripped or have holes after using my Haier HLP21E?
General| Type | Portable Washer |
|---|---|
| Loading Type | Top Load |
| Capacity | 1.0 cu. ft. |
| Color | White |
| Water Levels | 3 |
| Water Level Options | Low, Medium, High |
| Power Supply | Electric |
| Voltage | 120V |
| Control Type | Electronic |
| Energy Star Certified | No |
| Wash Programs | Heavy, Normal, Quick |
Read instructions, use for intended purpose, proper installation, and handling.
Proper plug use, cord care, unplugging for maintenance, and correct electrical supply.
Avoid operation in explosive fumes or washing flammable materials.
Ensure proper grounding; do not cut or remove grounding plug.
Vent hydrogen gas from water heater before use to prevent explosion risk.
Only authorized technicians should perform repairs unless instructions are understood.
Remove door from old appliances to prevent child entrapment.
Identifies key components of the washer, including lid, control panel, cabinet, and legs.
Details the functions of Power, Start/Pause, Program Select, and Water Level controls.
Guidance on loading clothes loosely, separating colors, and checking pockets.
Instructions on using detergent and bleach, including warnings and dilution.
Guide to cleaning the lint filter after each load and the water inlet filter monthly.
Explains how to choose wash programs, cycle times, and applications.
Details water levels (Low, Medium, High) and corresponding water usage in gallons.
Describes the end-of-cycle beep and safety requirement to keep the lid closed.
Provides a step-by-step guide to starting and operating the washing cycle.
Steps for removing packing materials and inspecting the appliance.
Lists and identifies all parts included with the washer, such as hoses and filters.
Select a suitable location away from heat sources on a hard, even surface.
Appliance must be stored and operated at room temperature, avoiding freezing.
Lists necessary tools like screwdrivers, pliers, wrench, tape measure, and level.
Steps for attaching the bottom panel to reduce noise during operation.
Instructions for installing the lint filter before using the washer.
How to adjust the leveling leg to ensure the washer is stable and operates correctly.
Steps for connecting water inlet and drain hoses, including height requirements.
Plugging the washer into a 115 Volt / 60 Hz, 15 Amps outlet.
Guide to attaching the adapter to the faucet for water connection.
Importance of grounding for safety and how to ensure the appliance is properly grounded.
Specifies the required voltage, amperage, and outlet type for the appliance.
Discourages extension cord use and advises on handling power outages.
Guidelines for cleaning the control panel, cabinet, and filters to prevent damage.
Steps for preparing the washer for storage or relocation, including disconnecting hoses.
Solutions for common issues where the washer fails to start or function.
Addresses issues like insufficient water, leaks, and drainage problems.
Troubleshooting common noises like tumbling, squeaking, and vibration.
Solutions for issues like wrinkled clothes, soap residue, or ripped garments.
Explains the one-year in-home service and limited parts warranty coverage.
Lists items not covered and how to obtain warranty service.
To Next Page