Haier HPY08XCM - Installation Procedures; Exhaust Hose Setup

ENGLISH
PAGE 7
ASSEMBLY AND INSTALLATION
E
4. Expand the 2 ends of the exhaust hose. Connect the exhaust nozzle to one end of the exhaust
hose by turning counter-clockwise (see figure D).
5. Raise the handle of the “C” shaped clamp on the back of the unit and insert the hose connector
end of the hose assembly into the lower part of the hose clamp. Secure the hose assembly
onto the back of the unit by lowering the “C” shaped clamp completely. Ensure that the hose
assembly is securely fastened before operation (see figure E).
6. Insert the exhaust hose with nozzle end into the window panel.
7. Plug the power cord into the wall outlet and press the "Reset” button to ensure the safety plug
is providing power to the unit.
8. Please allow 20" of space around the unit for proper air circulation.
D