Hints
Fan Operation
In FAN operation mode, the unit will not operate in COOL or HEAT mode but only
in FAN mode. A
UTO is not available in FAN modeAnd temp .setting is disabled.
In FAN mode,SLEEP operation is not available.
Press MODE button. For each press, operation
(1) Unit start
mode changes as follows:
Press ON/OFF button, unit starts.
Previous operation status appears on display. (Not Timer setting)
(2) Select operation mode
Unit will run in operation mode displayed on LCD.
Stop display at your desired mode.
Press FAN button. For each press, fan speed changes
(3) Fan speed selection
as follows:
LO MED HI
Unit runs at the speed displayed on LCD.
ON/OFF TEMP
SET
TIMER
CLOCKSWING
SLEEP
LOCK
RESET
FAN
MODE
HEALTH
1
2
3
4
(4) Unit stop
Press ON/OFF button, the unit stops.
AUTO COOL DRY FAN
HEAT
Operation
13
To Next Page
Loading...
Need help?
General
