Operation
Air Flow Direction Adjustment
1.Status display of air sending
Horizontal flap
( Auto swing )
Pos.4
Remote contro
ON/OFF
FAN
MODE
TIMER
CLOCK
SE
T
SLEEP
LOCK
RESET
SWING
ller
Blank
( Downward swing )
Pos.3
( Upward swing )
Pos.2
( Cool/Dry standard position)
Pos.1
2.Up and down air flow direction(Use remote controller)
Move the vertical blade by a knob on air
conditioner to adjust left and right direction
referring to Fig.
3.Left and right air flow adjustment
(manual)
For each press of SWING button, air flow direction on remote
controller display as follows according to different operation modes:
Pos.1 Pos.2 Pos.3 Pos.4
The horizontal flap
will
swing according to the above positions
Cautions:
Hints
As cold air flows downward in COOL mode, adjusting air flow horizontally will be much more
helpful for a better air circulation.
Do not try to adjust the flap by hand.
When adjusting the flap by hand,turn off the unit ,and use the remote controller to restart the unit.
When humidity is high,condensate water might occur at air outlet if all vertical louvers are
adjusted to left or right.
It is advisable not to keep horizontal flap at downward position for a long time in COOLor DRY
mode ,otherwise, condensate water might occur..
9
To Next Page
Loading...
Need help?
General
