POWER/SOFT Operation
To cancel TIMER mode
Just press CANCEL button several times until TIMER
let unit start or stop automatically a following times:Before
you wake up in the morning,or get back from outside or after
TIMER Operation
SMART
AUTO
POWER
SOFT
displayed Air conditioner
starts
For each press, is
Press POWER button again,
disappears,the operation
POWER Operation
When you need rapid cooling,
you can use this function.
POWER
SOFT Operation
You can use this function when
starts POWER function operation.
For each press, is displayed Air conditioner
Press SOFT button again,
disappears,the
operation stops.
SOFT
In SOFT operation mode, fan speed automati cally
takes low speed of AUTO fan mode.
Hints:
Long period SOFT operation will cause effect
of not too cool or not too warm.
In COOL mode, fan speed
automatically takes high speed
SMART
1
TIMER ON
Remote controller: "
TIMER ON
"
Select your desired
Remote controller: "
TIMER OFF
"
Time setting.
2
Every time the button is pressed,
decreases 1 min, if kept depressed, it will increase
3
Confirming your setting.
After setting correct time, press CONFIRM button press
CONFIRM button to confirm "
ON
"or"
OFF
" on the
OFF
remote controller stops flashing.
TIMER ON
Remote controller:
Remote controller:
OFF
TIMER ON
AM
AM
Operation
POWER function operation.
of AUTO fan mode.
stops.
POWER
silence is needed for rest or reading.
SOFT
During POWER operation, in rapid COOL mode,
the room will show inhomogeneous temperature
distribution.
Set Clock correctly before starting Timer operation.You can
you fall asleep at night.
mode disappears.
Select your desired operation
mode.
Select your desired
TIMER ON.
will flash.
TIMER OFF.
will flash.
time setting increases or
press TIMER ON button to confirm, follow the same
procedure in "Time setting for TIMER OFF "
OFFTIMER ON
OFF
TIMER ON
press TIMER OFF button to confirm, follow the same
procedure in "Time setting for TIMER ON "
rapidly. It can be adjusted within 24 hours.
7
To Next Page
Loading...
