Haier HSU-18HVA103/R2(DB) User Manual

Fan Operation
2.Select operation mode
Press FAN button. For each press, fan speed changes as
follows:
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Remote controller:
Then Select FAN operation
3.Fan speed selection
4.Unit stop
About FAN operation
In FAN operation mode, the unit will not operate in
COOL or HEAT mode but only in FAN mode ,AUTO is
not available in FAN mode.And temp.setting is disabled.
In FAN mode,SLEEP and POWER/SOFT operation is
not available.
Press ON/OFF button, the unit stops.
AUTO
LOW
MED
HI
COOL DRY FAN HEAT
Operation
1. Unit start
Press ON/OFF on the remote controller, unit starts.
60
POWER/SOFT
On the displaying board,colorful displaying bar will be pink.
Remote controller
Domestic Air Conditioner
HSU-18,22HVA103/R2(DB) System Configuration

Haier HSU-18HVA103/R2(DB) Specifications

General

Brand	Haier
Model	HSU-18HVA103/R2(DB)
Category	Air Conditioner
Language	English