Error Codes and Description indoor display 
Code indication 
 
indoor 
Outdoor 
(LED1 flash 
times) 
Description 
Reference
Page 
Indoorand Outdoor 
E7  15 
Communication fault between indoor and outdoor 
units 
 
E1  
Room temperature sensor failure   
 
E2 
 
Heat-exchange sensor failure   
 
E4  
Indoor EEPROM error 
 
E14  
Indoor fan motor malfunction 
 
 
Indoor Malfunction 
 
High work-intense protection 
 
F12 
  1 
Outdoor  EEPROM error 
 
F1 
2 
The protection of IPM 
 
F22 
3 
Overcurrent  protection of  AC electricity  for 
the outdoor model 
 
F3    4 
Communication fault between the IPM and outdoor 
PCB 
 
F19    6 
Power voltage is too high or low 
 
F4    8 
Overheat protection for exhaust temperature 
 
F21 
10 
Frost-removing temperature sensor failure 
 
F6 
   12 
Ambient temperature sensor failure 
 
F25 
 13 
Exhaust temperature sensor failure 
 
F11    18 
deviate from the normal    for the compressor 
 
----    19 
Loop  of  the station detect error 
 
E9  21 
High work-intense protection 
 
---    24 
Overcurrent of the compressor 
 
 
 
Outdoor Malfunction 
---    25 
Overcurrent protection for single-phase of the 
compressor 
 
HSU-18,22HVA103/R2(DB)   Service Diagnosis 
76
            Domestic Air Conditioner 
7.2.Trouble Shooting