What to do if my Haier Washer fails to operate?
If your Haier Washer isn't operating, here's what to check: * Ensure the program has been started. * Verify the door is properly closed. * Make sure the machine is switched on. * Check the power supply. * Deactivate the child lock, if it's enabled.
How to reduce strong vibration while spinning in Haier HW60-12829?
To stop strong vibrations while spinning in your Haier Washer: * Remove all transportation bolts. * Ensure the appliance is on solid, level ground. * Check and correct the load weight and balance.
Why is my Haier HW60-12829 Washer draining constantly?
If your Haier Washer is not draining properly, it could be due to several reasons. Ensure the drain hose is correctly installed and not placed in water. The cause may be that the height of the drain hose is below 80 cm or the drain hose end could reach into water.
Why is my Haier HW60-12829 spinning failing?
If spinning fails in your Haier Washer, check the machine load and laundry for unbalance and run a spinning programme again. The cause may be unbalance of laundry.
Why is there no water in my Haier HW60-12829?
If your Haier Washer isn't filling with water, check the following: * Ensure the water tap is open. * Inspect the inlet hose for kinks. * Verify adequate water pressure. * Confirm the door is properly closed. * Ensure a consistent water supply.
What to do if my Haier HW60-12829 has a drainage failure?
To address drainage failure in your Haier Washer, unblock the drain hose and ensure it is properly installed. The issue may be that the drain hose is blocked or the drain hose end is higher than 100 cm above the floor level.
Why does my Haier HW60-12829 operation stop before completing wash cycle?
If your Haier Washer stops before completing the wash cycle, check both the power and water supply. The cause may be water or electric failure.
How to fix UNB error on Haier HW60-12829?
If your Haier Washer shows a UNB error, it means there's an unbalanced load. To fix this, check and balance the laundry load in the drum and reduce the load if necessary.
Why does my Haier HW60-12829 operation stop for a period of time?
If your Haier Washer displays an error code or the operation stops for a period of time, consider display codes, reduce or adjust the load. It may also be because the programme performs soaking cycle or detergent is not appropriate or excessive use of detergent. You may need to cancel the programme and restart.
How to get rid of excessive foam in my Haier HW60-12829?
If you notice excessive foam in the drum or detergent drawer of your Haier Washer, check the detergent recommendations and reduce the amount of detergent used.
General| Load Capacity | 6 kg |
|---|---|
| Spin Speed | 1200 rpm |
| Energy Efficiency Class | A+++ |
| Number of Programs | 16 |
| Loading type | Front Load |
| Weight | 65 kg |
| Color | White |
Essential checks and handling precautions before operating the appliance.
Guidelines for safe operation during everyday use of the washing machine.
Safety measures for cleaning and maintaining the appliance.
Precautions for safely installing the washing machine.
Specifies the appliance's design purpose and limitations for safe operation.
Visual identification and labelling of front and rear appliance components.
Lists and illustrates the items provided with the washing machine.
Details the three compartments within the detergent drawer and their uses.
Explains how to switch on/off and select wash programmes.
Details the start/pause functionality and available additional option buttons.
How to adjust washing temperature and spin speed using dedicated buttons.
How to set a delayed start and activate an extra rinse cycle.
Explains the child lock feature and the function of control panel indicators.
Details the information shown on the appliance's digital display.
Instructions for connecting the appliance to power and water supply.
Steps for sorting, checking, and loading laundry correctly.
Guidance on how to properly load the washing machine drum.
Advice on choosing and using appropriate detergents for different laundry types.
Step-by-step guide on how to add detergent and conditioner.
How to switch on the appliance and choose a wash programme.
Options for customizing the selected programme with additional settings.
Instructions on how to start, pause, resume, and cancel wash programmes.
Steps to follow after the wash cycle, including door unlocking and shutdown.
How to enable or disable the acoustic signal for programme end and button presses.
Step-by-step instructions for removing and cleaning the detergent drawer.
How to clean the outer casing and rubber components of the appliance.
Guide to cleaning the inlet valve filter to prevent blockages.
Procedures for cleaning the drum and removing rust stains.
Steps to take when the appliance will not be used for an extended time.
Instructions for cleaning the pump filter to ensure proper drainage.
Describes the meaning of various codes displayed during operation.
Provides solutions for common problems indicated by display error codes.
Offers solutions for issues not accompanied by specific display codes.
Steps to take if the appliance experiences a power outage during a cycle.
Initial checks and preparations required before installing the washing machine.
Instructions for fitting the bottom cover and removing transport bolts.
Steps for moving the appliance and re-installing transport bolts.
How to adjust the feet to ensure the appliance is level and stable.
Various methods for connecting the drain hose to plumbing or sinks.
How to connect the inlet hose to the water tap securely.
Guidelines for safely connecting the appliance to the power supply.
Detailed technical data and performance metrics for the appliance models.
Further dimensions, electrical, and weight specifications for the appliance.
Information on the product's adherence to EC directives and CE marking.
To Next Page
