GB
3-Control panel
9
3.2 “Power“ button
Press this button (Fig. 3-2) gently to switch on, the
display is illuminated. Press it again for about 2 secon-
ds to switch off.If no panel element or programme is
activated after a while machine will shut down autom-
atically.
3.5 Function buttons
The function buttons (Fig. 3-5) enables additional op-
tions in the selected programme before programme
start. The related indicators are displayed.
-
gramme, all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
To delete the setting or to cancel the setting process,
press the function button until the desired LED lights
Note: Factory settings
there is no special requirement default settings are recommended.
3.4 „Start/Pause“ button
Press this button (Fig. 3-4) gently to start or inter-
rupt the currently displayed programme. During pro-
gramme interruption the digits on the display are blink-
ing.
Start/
Pause
3-4
Power
3-2
3.3 Programme selector
Press one of these buttons (Fig. 3-3) sequentially until
the indicator of the desired programme lights up, and
the default settings are displayed.
Temp.
Power
Start/
Pause
Spin
Express
15min
Fast
Delicate/
Silk
Hand
wash
Hygienic
Babycare
Program
R
Cotton
Cotton+
Synthetic
Mix
Jeans
Sport
Wool
3-3
DelayTemp.
Spin
speed
Extra
rinse
3.5.1 3.5.2 3.5.3 3.5.4
3-5
3.5.1-Function button „Temp.“
Press this button (Fig. 3-5.1) to change the washing
temperature of the programme. If no value is illumi-
nated the water will not heated.
In conjunction with the “Spin speed” button, the child
3-7 3-8
3-5.1
3-5.2
3.5.2-Function button “Spin speed”
Press this button (Fig. 3-5.2) to change or deselect the
spin of the programme. If no value is illuminated the