Haier HW70-14F2B User Manual

63
CHAPTER -7: MAINTENANCE AND CLEANING OF YOUR
MACHINE (WATER INLET FILTERS)
Filterstoavoiddirtandforeignsubstancesinthewaterfrom
penetratingintothemachineareavailablebothonthesideof
tabandontheendsofwatervalvesalongthewaterinlethose
ofyourmachine.
Ifyourmachinecannotintakesufcientamount
ofwaterdespitewatertabbeingopen,these
ltersshouldbecleaned.
(Itisrecommendedthatyoucleanyourpump
lteroncein2months.)
•Detachthewaterinlethoses.
•Removetheltersonwaterinletvalvesusing
pliersandthencleanitwithabrushinwater.
•Disassembletheltersonthesideoftabside
ofwaterinlethosesmanuallyandcleanit.
•Afterclearingthelters,retinthereverseof
theremovalinstructions.
CAUTION:
Filters of water inlet valves may be
clogged due to contaminated water tab or
lack of necessary maintenance or valves
may be broken down, causing water leaking
into your machine continuously.
The breakdowns that may arise due to
these reasons are out of the scope of
warranty.

Haier HW70-14F2B Specifications

General

Brand	Haier
Model	HW70-14F2B
Category	Washer
Language	English