Why is there excessive foam in my Haier Washer/Dryer?
If your Haier Washer/Dryer is producing excessive foam in the drum and/or detergent drawer, the detergent may not be appropriate or you might be using too much. Check detergent recommendations and reduce the amount of detergent used.
Why does operation stop for a period of time in Haier Washer/Dryer?
If the operation of your Haier Washer/Dryer stops for a period of time, it could be due to an error code, the load pattern, or the program performing a soaking cycle. Consider display codes, reduce or adjust the load, or cancel the program and restart it.
Why am I getting unsatisfactory washing result from my Haier HWD100-B14979?
If you're getting unsatisfactory washing results with your Haier Washer/Dryer, the degree of pollution may not match the selected program, the detergent quantity might be insufficient, the maximum load may have been exceeded, or the laundry may be unevenly distributed. Select another program, use the correct amount of detergent, reduce the load, and loosen the laundry.
General| Capacity | 10 kg (washing) / 6 kg (drying) |
|---|---|
| Spin Speed | 1400 RPM |
| Energy Efficiency | A |
| Loading Type | Front Loading |
| Dimensions | 850 x 600 x 600 mm |
General safety checks and precautions before operating the appliance for the first time.
Essential safety guidelines for using the washing machine during everyday operation.
Guidelines for safe installation and intended use of the washing machine.
Table detailing programmes, load capacity, temperature, spin speed, and functions.
Steps for switching on, selecting programmes, and starting/interrupting cycles.
Solutions for common problems indicated by display codes.
Resolving issues without specific display codes, like operational failures.
Unpacking the appliance and removing transportation bolts.
Connecting the drain hose to a sink or waste pipe.
Steps for connecting the water supply and the electrical power.
To Next Page