What to do if my Haier HWF85AN1 Washer operation stops before completing wash cycle?
If your Haier Washer stops before completing the wash cycle, it is possible that there is a water or electric failure. Check both the power and water supply to ensure they are functioning correctly.
What to do if my Haier HWF85AN1 is constantly draining?
If your Haier Washer is draining during a cycle, it could be due to the height of the drain hose being below 80 cm. Ensure that the drain hose is properly installed. Also, make sure the drain hose end is not reaching into water.
How to solve Haier Washer spinning fails?
If the spinning function fails on your Haier washer, it's likely due to an unbalanced laundry load. Redistribute the load and run a spin program again.
Why Haier HWF85AN1 stops before completing wash cycle?
If your Haier washer stops before completing the wash cycle, it may be due to a water or electric failure. Check both the power and water supply to the appliance.
What to do if my Haier HWF85AN1 Washer has drainage failure?
If your Haier washer is experiencing drainage failure, it could be due to a blocked drain hose or if the drain hose end is higher than 100 cm above the floor level. Unblock the drain hose and ensure it's properly installed.
What to do if my Haier Washer fails to operate?
If your Haier washer isn't operating, ensure the program has started, the door is properly closed, and the machine is switched on. Also, check for a power failure and deactivate the child lock if it's activated.
Why is spinning failing on my Haier HWF85AN1?
If the spinning cycle fails in your Haier Washer, it's likely due to an unbalanced laundry load. To fix this, redistribute the load evenly inside the drum and then run the spin program again.
Why Haier Washer has no water?
If your Haier Washer isn't filling with water, start by checking the water tap to ensure it's fully open. Inspect the inlet hose for any kinks that might be blocking the water flow. Also, verify that the water pressure is at least 0.03 MPa. Finally, make sure the door is properly closed and that there isn't a water supply failure.
General| Capacity | 8.5 kg |
|---|---|
| Spin Speed | 1400 RPM |
| Wash Programs | 16 |
| Color | White |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Energy Rating | 4 Star |
| Water Rating | 4.5 Star |
Key safety instructions to follow before operating the washing machine for the very first time.
Essential safety guidelines and warnings for the safe and proper use of the appliance during daily operation.
Critical safety requirements and precautions for the correct installation of the washing machine.
Instructions for using Start/Pause, Key Lock, and Favourite buttons for programme management.
Comprehensive table detailing all available wash programmes, load capacities, temperatures, and settings.
Procedures for starting, interrupting, resuming, and completing a wash programme.
Detailed guide on cleaning the pump filter, including safety warnings and refitting instructions.
Guide to resolving problems indicated by specific error codes on the appliance display.
Solutions for common washing machine problems that do not trigger specific display error codes.
Addressing issues like excessive foam, unbalanced loads, and unsatisfactory wash results.
Procedures and precautions for operating the machine during and after a power interruption.
Crucial instructions for removing transport bolts before the first use to prevent machine damage.
Steps for connecting the fresh water inlet and the electrical power supply.
To Next Page
