EasyManuals Logo

Haier HWF95AN1 User Manual

Haier HWF95AN1
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
9-Care and cleaning
NZ AU
21
9.5 Long periods of disuse
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 9-6).
92.
3. Open the door to prevent formation of mould
and odours. Leave door open while not used.
Before next usage check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and without leaks.
9-6 9-7
1.
2.
Push and open service flap
(Fig. 9-9).
3. Provide a at container to catch leach water
(Fig. 9-10). Be prepared to catch large amounts
4. Pull the drainhose out and hold its end above the
container (Fig. 9-10).
5. Take the sealing plug out of the drainhose (Fig.
9-10).
6. After complete drainage close drainhose (Fig.
9-11). and push it back into the machine.
7. Unscrew and remove counter clockwise the pump
8. Remove contaminants and dirt (Fig. 9-13).
WARNING!
hot! Before any action please ensure water has
cooled down.
for instance if the appliance:
Doesn´t drain the water.
Doesn´t spin.
Cause unusual noise while running.
9
9
9
9-10
9-11
9-8 9-9
9-12 9-13
of water.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier HWF95AN1 and is the answer not in the manual?

Haier HWF95AN1 Specifications

General IconGeneral
BrandHaier
ModelHWF95AN1
CategoryWasher
LanguageEnglish

Related product manuals