To Next PageTo Next PageWhat to do if my Haier HWM70-A Washer won't drain or drains slowly and displays E1?
If your Haier Washer is not draining properly and shows error code E1, it could be due to a blocked drain hose. Clean any foreign material from the hose and press the start button again.
Why is my Haier HWM70-A Washer not starting?
If your Haier Washer isn't starting, there could be a few reasons: * Check if there's a power failure. * Ensure the power plug is tightly inserted. * Make sure the water level has reached the preset position. Also, confirm the top lid is securely closed and the clothes are set flat inside the machine. If any of these are off, correct them.
What to do if my Haier HWM70-A Washer stops during spinning and displays E2?
If your Haier Washer stops during the spinning cycle and displays error code E2, the top lid might not be closed properly. Make sure the top lid is completely closed.
What to do if my Haier Washer won't inlet water or is too slow and displays E4?
If your Haier Washer isn't filling with water or is filling very slowly and shows error code E4, check the following: * Ensure the water faucet is open and there is no water supply failure. * Check if the water inlet valve is blocked. Open the water faucet, press the Start/Pause button again. If the issue persists, clean the water inlet valve and try again.
How to fix abnormal sound inside Haier Washer?
If you hear abnormal sounds coming from your Haier Washer, it could be due to several reasons: * The machine might be uneven. * There might be foreign objects inside. * The load might be unbalanced during spinning. Adjust the machine to be level, remove any foreign materials, and reorder the laundries, ensuring the top lid is closed.
Why is there no water inlet in my Haier HWM70-A Washer?
If your Haier Washer isn't taking in water, check these things: * Make sure the power plug is plugged in tightly. * Ensure the water faucet is opened. * Confirm that you've pressed the POWER ON/OFF and START/PAUSE buttons. Plug the power plug tightly, open the water faucet, and push the POWER ON/OFF and START/PAUSE buttons.
How to fix a leaking water faucet on my Haier HWM70-A Washer?
If the water faucet is leaking on your Haier Washer, check if the screw of the water inlet hose connector is loose or twisted. Properly fasten the screw of the connector.
What to do if my Haier HWM70-A safety switch activates and displays E3?
If the safety switch activates on your Haier Washer, preventing spinning and displaying error code E3, it might be due to an unbalanced load or the machine not being level. Reorder the laundries, close the top lid, set the washing machine horizontally, and then open and close the top lid once.
Why is my Haier HWM70-A beeping and showing E0 after starting the reserve function?
If your Haier Washer rings and the display shows E0 after starting the reserve function, it means the top lid is open. Close the top lid.
Instructions for adding detergent, softener, and whitener, including dosage.
Explanation of the functions of various buttons like Water Inlet, Water Level, and Current.
Details on Digitron display, Power, Start/Pause, Select, Reserve, and Program buttons.
Step-by-step guide on how to operate the washing machine using its buttons.
Identifies common issues, their reasons, and step-by-step solutions.
General
