1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
2. Do the above steps again.
3. Press VOL-
/
VOL+ to set Skip as Off.
Auto search
Press A MENU on the remote control to display main
menu, and then press CH+ /CH- to select Tuning
menu.
press B
CH+ /CH-
to select the Auto Search option,
press OK or
VOL+
to enter the auto search menu,
afterwards press
VOL-
/
VOL+
to select the Confirm
option,
and finally press OK to confirm the starting of
auto search.
During auto search, the scale value on the progress C
bar is continually increasing, indicating the auto
search is in progress. After finishing the auto search,
the TV will play the channel starting the auto search.
To stop the search in halfway, just press MENU/OK,
and the TV will play the first searched channel.
Close Caption
Press A MENU on the remote control unit or MENU on
the TV’s front panel to display main menu, and then
press CH+ /CH-
to select Tuning menu,
press OK or
VOL+
to enter.
Press B CH+ /CH-
to select the close caption option.
Press C
VOL-
/
VOL+
to select CC1,CC2,CC3,CC4,Text1,T
ext2,Text3,Text4 or OFF.
Watching TV Program
You can watch TV program in a presetting channel.
How to select the desired program
Using Program number buttons A
Directly enter the channel number with the numeric
keypad on the remote control. If to select channel
numbers of double-digital or three-figure, press
continuously the numeric buttons in three second.
Using
B CH+ /CH- buttons
Press CH+ to select a channel number in number
increasing direction. Press CH- to select a channel
number in number decreasing direction.
How to select the desired sound
Press VOL-/+ buttons on the remote or the front of
the TV set to adjust the volume level. The range is
0~100. When the volume buttons are pressed the
volume level is displayed automatically on the TV
screen.
Mute Setting
Press A MUTE button on the remote control and a icon
will display on the screen. At this time, the sound of
the TV set is turned o.
If you want to recover the sound, press
B MUTE
button again or directly press VOL+ button.
Quick program view
Suppose that you previously watched a TV program A
on Channel 8, but now you are watching a TV
program on Channel 18 (as shown in the below
figure).
To Next Page
Loading...
Need help?
General
