Haier LE42K5000A User Manual

Operation
4. Channel MENU
1). Press the MENU button and then press the ◀▶ buttons
to select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu.
Antenna Type/Auto Tune/Manual Tune/Program Edit/Signal
Information/CI Information.
4.1 Antenna Type
1). Press the MENU button and then press the ◀▶ buttons
to select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Antenna Type and press
OK to confirm.
3). press the ◀▶ to select Air or Cable.
Picture Audio Channel TimeWide Mode Setup
Antenna Type Auto Tune Manual Tune Program Edit Signal Information CI Information
Antenna Type
Antenna Type
Move Back
Cable
Antenna Type
Antenna Type
Move Back
Air
4.2 Auto Tune
1) press the ◀▶/▼▲ buttons to select the country where
you will operate the TV. Press the OK button to confirm.
2) If "country" is choosen, the following menu will displayed,
then press the ◀▶ buttons to select Full Scan or Quick Scan.
3) press▼ ▲ to select confirm and press OK to Confirm.
4).Channel tuning will commence. This operation may take
up to some minutes . The display will show the progress of
the tuning and the number of channels found.
5). If you want to skip the Auto tuning, press the MENU
button or OK button to interrupt the tuning half way.
A pop-up screen will be displayed, press the OK button to
confirm. You will then go back main menu.
6). After tuning is complete, the channels are arranged in a
preset order. If you wish to skip channels, modify the preset
order or rename channels, select Programme Edit under the
channel menu.
Auto Tune
Search Type Full Scan
Modulation
Symbol Rate
Network ID
Auto
Auto
0
Move Enter Back
OK
Confirm
Modulation Symbol Rate Network ID
Auto Tune
Search: 0 DTV 0 Radio 0 Data
VHF CH0 Freq 0 MHZ
0%
Start Search
Enter Back
OK
4.3 Manual Tune
1). Press the MENU button and then press the ◀▶ buttons
to select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Manual Tune and press
OK to confirm.
3).press▼▲the select Frequency, Modulation, Symbol Rate
etc.
4).press ◀▶ to adjust the value.
5).press ▼▲ to select Search button and than press OK to
Search.
Manual Tune
Frequency 113 MHZ
Modulation
Symbol Rate
Signal Strength
64 QAM
6875
Move Enter Back
OK
Search
DTV: 0 DATA: 0 RADIO: 0
Signal Quality
Program Edit
Move Enter Back
OK
Delete Edit Move Skip
5 five DTV
15 Ch 15 DTV
16 QVC DTV
4.4 Program Edit
1). Press the MENU button and then press the ◀▶ buttons
to select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Program Edit and press
OK to confirm. You can Delete, Rename, Move, Skip, favorite.
● Delete
Press teletext red button, the program is cursor will delete.
● Edit
Only can rename ATV programs.
Move the cursor to the program, press teletext green button
to rename the program.
Press ▼▲ to choose the character, press◀▶to move the
cursor.Press MENU button to exit edit, Press EXIT to exit the
menu.
● Move
Use the Arrow Buttons to select the channel you wish to move.
Then press the Yellow Button to select Move function. Once
active use the Arrow Buttons to move and then press OK to
confirm.
Favorite/
15
Country
Iraq
Kuwait
Indonesia
Philippines
Thailand
Iran
Saudi Arabia
Israel
Nigeria
Morocco
Egypt
India Malaysia Pakistan Benin

Haier LE42K5000A Specifications

General

Brand	Haier
Model	LE42K5000A
Category	LCD TV
Language	English