Haier LT19M1CW User Manual

2. Insert two new 1.5V size AAA
Batteries with the and marks
correctly aligned.
See fig. 2.
NOTE ON BATTERIES:
• Do not mix different types of
batteries or an old battery with
a new one.
• To prevent the risk of leakage
or explosions, never recharge
the batteries, apply heat or take
them apart.
• When not using batteries,
remove them to prevent battery
drain.
• If liquid leaks from the batteries,
throw them away. Thoroughly
clean the battery compartment
with a dry cloth.
REMOTE CONTROL
1. Unclip the Battery Cover from the
Remote Control.
See fig. 1.
REMOTE CONTROL
NOTES:
- Please read the important safety
instructions before use.
fig. 1
Battery
Compartment
Cover
fig. 2
HD Ready Digital LCDTV User Manual
6

Haier LT19M1CW Specifications

General

HD type	WXGA
Display diagonal	19 \
Display brightness	250 cd/m²
Display resolution	1440 x 900 pixels
Display technology	LCD
Native aspect ratio	16:9
Viewing angle, vertical	170 °
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	160 °
Supported graphics resolutions	1440 x 900 (WXGA+)
Manual	Yes
Package weight	5000 g
RS-232 ports	0
SCART ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Common interface Plus (CI+)	No
Number of OSD languages	14
On Screen Display (OSD) languages	DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, ITA, NOR, POL, POR, RUS, SWE
Product color	Black
LED indicators	Y, Stand-by
Panel mounting interface	100 x 100 mm
AC input voltage	110 - 230 V
Power consumption (standby)	1 W
Power consumption (typical)	45 W
RMS rated power	6 W
Analog signal format system	PAL, SECAM
Digital signal format system	DVB-T

Weight and Dimensions

Depth (with stand)	95 mm
Width (with stand)	455 mm
Height (with stand)	308 mm
Weight (with stand)	4000 g