Kraken 2.9
Kraken Server Quick Start Guide
Generated on:2024-02-19 21:53:58
HVS-ID-QSG-KRAK-29, Issue 01
Kraken Server Quick Start Guide
Kraken Server Encoder/Transcoder, Version 2.9
This Quick Start Guide providesthe stepsrequired to install and connect to your Kraken H.264/HEVC
encoding/transcoding appliance.
For detailed configuration and operationinformation, refer to theUser's Guide. To install the Kraken CR,
refer to theKraken CR Quick Start Guide. To install a Kraken VM, refer to the Kraken OVA Deployment
Guide.
The above documents are available on the InfoCenter (https://doc.haivision.com). For the default
credentials, refer to the
Important Notice
(postcard shipped with the server).You may download the
Important Notice
as well as the latest software and Release Notesthrough theDownload Centeron the
Haivision Support Portal (http://support.haivision.com).
Safety Guidelines
Use the following guidelines when unsafe conditions exist or when potentially hazardous voltages are
present:
Always use caution and common sense.
To reduce the risk of electrical shock, do not operate equipment with the cover removed.
Repairs must be performed by qualified service personnel only.
Improper handling and/or installation practices of sensitive equipment may VOID the warranty.
Caution
When handling components, or when setting switch options, always use an antistatic wrist strap
connected to a grounded equipment frame or chassis.
If a wrist strap is not available, periodically
touch an unpainted metal surface on the equipment.
Never use a conductive tool, such as a
screwdriver or a paper clip, to set switches.
To Next Page
Need help?
General
