Haivision Makito X - User Manual

Makito
™
X
Encoder Family
User’s Guide v2.0
HVS-ID-UG-MAKX-20
Issue 01

Summary

Safety and Introduction

Safety Guidelines

Essential guidelines for safe operation and handling of the Makito X encoder.

Installation and Setup

CHAPTER 1: Introduction

Overview of the Makito X Encoder Family, hardware components, and key features.

CHAPTER 2: Installing the Encoder

Explains how to set up and connect the Makito X encoder and includes factory reset instructions.

Powering Up the Unit

Step-by-step guide on how to properly power on the Makito X appliance and its various chassis options.

Web Interface Operations

CHAPTER 3: Getting Started with the Web Interface

Guide to accessing and navigating the Makito X web interface for configuration and management.

Encoder Management Functions

CHAPTER 4: Managing the Encoder

Comprehensive guide on managing video encoding, streaming, recording, and media assets via the web interface.

System Administration and Security

CHAPTER 5: System Administration and Storage

CHAPTER 6: Managing Users and Security

Advanced Features and Appendices

CHAPTER 7: Configuring A;V Services Using SNMP

Appendix A: CLI Command Reference

Appendix B: Technical Specifications

Appendix D: Warranty Information

Haivision Makito X Specifications

General

Video Encoding	H.264/AVC, H.265/HEVC
Audio Encoding	MPEG-1 Layer II
Input Interfaces	HDMI, SDI
Output Interfaces	IP
Latency	Less than 100 ms
Resolution Support	Up to 4K
Network Protocols	RTP, UDP, TCP, SRT, RTSP, RTMP
Operating Temperature	0 to 40°C